Mechanical Drive Packaged Systems

Markets Served

Marine Propulsion Systems

Corvettes, Fast Attack Craft, Fast Patrol Boats, Hovercraft, Mega Yachts, Fast Ferries
Single and Twin Configurations
Water Jet Propulsion Systems
Fixed and Controllable Pitch Propulsion Systems
Combined Gas Turbine with Diesel Engine Propulsion Systems (CODOG, CODAG Systems)
Onshore and Offshore Applications
Gas gathering, gas lift and gas reinjection applications
Gas transmission pipelines

Compressor Drive Systems

Combined Gas Turbine with Diesel Engine Propulsion Systems (CODOG, CODAG Systems)

Marine Propulsion Packaged Systems

Design Features

Pratt & Whitney / Vericor Aeroderivative Industrial Gas Turbines
Speed Reduction Gearboxes to match propulsion system
Light weight turbine design easy to remove and handle
Modular Construction simplifies on-site maintenance and increases on-line availability

Performance Features

Rugged Reliable Performance
Commercial Classification through ABS, DNV
Various Test Options Available

Marine Propulsion Package

Nominal rating based on ISO standard conditions at 15ºC (59ºF), sea level and no inlet / exhaust duct losses, relative humidity 60% and natural gas fuel with lower heating value (LHV) 35 MJ/nm3 (940 Btu/scf).
P&W ST18; P&W ST40; Vericor TF40; Vericor TF50

Compressor Drive Packaged Systems

Package Features

Siemens SGT-A05 (Industrial 501-K) Aeroderivative Industrial Gas Turbines.
Two shaft turbine design, power turbine speed to match gas compressor.
Light weight turbine design easy to remove and handle.
Modular Construction simplifies on-site maintenance and increases on-line availability.
Rugged Reliable Performance.
Single lift structural base plate for gas generator, power turbine and compressor reduces installation time and insures alignment.
Package mounted acoustical and weatherproof enclosures simplify installation.
Remote mounted gas turbine and compressor control panels suitable for control room installation.
Multiple Fuel System and Emission Control Options Dry Low Emission System Available.
Mechanical Run and Performance Testing at the factory reduces on-site time for commissioning.
Nominal rating based on ISO standard conditions at 15ºC (59ºF), sea level and no inlet / exhaust duct losses, relative humidity 60% and natural gas fuel with lower heating value (LHV) 35 MJ/nm3 (940 Btu/scf).
RR 501KC5s; RR 501KC7s

OnPower, Inc.

Copyright © OnPower, Inc.
checkcogsdropdatabaselicenseuserschart-barscheckmark-circleplus-circle